Double Sliding Frameless Tub Door – Model BD01
Shipping Method: LTL
Shipping Time: 7-15 business days
The BAKIWHS BD01 double sliding frameless tub door is designed for 60-inch bathtub openings and allows both glass panels to slide for convenient access from either side. It features 3/8-inch tempered safety glass, corrosion-resistant stainless steel hardware and a clean frameless appearance. Available in 60-inch and 66-inch heights, this model is intended for installation on a finished bathtub ledge. Measure the completed opening, wall alignment and tub-deck depth before selecting a size.
Features
Dual Sliding Glass Panels
Both panels slide to provide convenient access from either side of the bathtub.
Designed for Bathtub Installations
The 60-inch or 66-inch height is intended for bathtub-and-shower combinations rather than a full-height shower opening.
Space-Saving Operation
The sliding panels do not require the outward floor clearance needed by a pivot door.
3/8-Inch Tempered Safety Glass
The 10 mm tempered glass provides stability and is designed to break into small pieces if breakage occurs. Learn how tempered shower glass is tested, what can cause breakage and how to inspect it safely in our tempered shower glass safety guide.
Stainless Steel Top Rail and Hardware
The rail, handles and supports use corrosion-resistant stainless steel suited to wet bathroom environments.
Water Containment for Tub Installations
An anti-splash threshold and side seals help keep water within the bathtub area.
Two Height Options
Choose between 60-inch and 66-inch heights after measuring the finished opening and checking the showerhead position.
Four Hardware Finishes
Available in Brushed Nickel, Brushed Gold, Chrome and Matte Black.
Specifications
| Brand | BAKIWHS |
|---|---|
| Model | BD01 Tub Door |
| Door Type | Double Sliding |
| Installation Type | Bathtub |
| Frame Style | Frameless |
| Nominal Opening Width | 60 inches |
| Available Heights | 60 / 66 inches |
| Glass Thickness | 3/8 inch (10 mm) |
| Glass Type | SGCC-certified tempered safety glass |
| Hardware Material | 304 stainless steel |
| Finishes | Brushed Nickel, Brushed Gold, Chrome and Matte Black |
| Sliding Panels | Two sliding glass panels |
| Warranty | 10-Year Limited Warranty |
Parts & Installation
For additional model videos and installation resources, visit the BD01 installation guide.
Is This Double Sliding Tub Door Right for Your Bathroom?
Designed for Bathtub Installations
The BD01 Tub Door is designed for installation on a finished bathtub ledge and should not be confused with the full-height BD01 shower-door model. Its 60-inch or 66-inch height helps contain water in a bathtub-and-shower combination while maintaining an open, frameless appearance. Before ordering, confirm that the bathtub, wall surfaces, tile and other finishes are completely installed.
Dual Sliding Access
The double sliding configuration allows the glass panels to move for convenient access from either side. Because it does not require the outward clearance of a pivot door, it is a practical choice where a toilet, vanity or other bathroom fixture limits floor space. Check that the handles, glass panels and top rail can operate without contacting nearby fixtures.
Opening and Tub-Ledge Requirements
Measure the finished opening at the top, middle and bottom, then use the smallest measurement when comparing the opening with the product specifications. Check both walls for plumb, confirm that the bathtub ledge is level and verify that it provides enough depth for the rail and bottom guide. The walls must provide suitable support for the mounting hardware. Tempered glass cannot be cut, drilled or resized after manufacturing.
Choose the Correct Height and Finish
The BD01 is available in 60-inch and 66-inch heights with Brushed Nickel, Brushed Gold, Chrome and Matte Black hardware finishes. Select the height according to the completed opening, showerhead position and the amount of coverage required above the tub. The finish changes the appearance of the hardware but does not change the installation dimensions. Always confirm the selected size before adding the product to your cart.
