Installing a shower door can instantly upgrade your bathroom's appearance and functionality—but only when done right. Whether you're replacing an old door or setting up a brand-new enclosure, the installation process plays a huge role in the final outcome.

At Bakiwhs, we’ve helped thousands of homeowners and contractors install frameless shower doors that combine performance, durability, and visual appeal. Here’s our up-to-date guide for getting it done like a pro.

1. Prep the Space Properly

Before unpacking any glass, make sure the shower area is ready:

• Walls must be fully tiled and dried

• Thresholds must be level and sealed

• Measure twice—width, height, and wall plumb are all critical

A small mistake in measurement can cause misalignment or leaks. Bakiwhs doors are precision-built, so exact fitting is key.

2. Choose the Right Installation Method

There are two main installation types for shower doors:

• Wall-mounted: Great for solid tiled walls, secured with anchors and hinges

• Track-mounted (sliding doors): Ideal for limited space or bathtub setups

Frameless doors typically require drilling into tile, so plan ahead with the right tools and anchors.

3. Use High-Quality Hardware and Sealants

A sturdy install depends on more than just the glass:

• Bakiwhs doors include stainless steel hinges and rollers

• Use clear silicone caulk for watertight seals

• Check that all components (handles, towel bars, bottom sweeps) are level and secure

Pro tip: Let sealant cure for 24 hours before first use to prevent leaks.

4. Safety First

Tempered shower door glass is tough but must be handled with care. Always:

• Wear gloves and safety glasses

• Work in pairs when lifting or positioning glass

• Avoid over-tightening brackets which may stress the glass

Bakiwhs uses 3/8" tempered safety glass for maximum strength and safety.

5. Call a Pro If You’re Unsure

Some installations are DIY-friendly, but frameless doors, especially with custom dimensions, often require a professional installer. If precision isn’t your thing, don’t risk the glass—call a licensed contractor.

Frequently Asked Questions (FAQ)

1. Can I install a shower door by myself, or do I need a professional?
It depends on the type of shower door. Sliding doors with tracks can be DIY-friendly, but frameless shower doors often require precise drilling and alignment—professional installation is recommended for best results.

2. How long does it take to install a shower door?
Most shower door installations take 2–4 hours, depending on the door type and wall conditions. Allow an extra 24 hours for the sealant to fully cure before using the shower.

3. What tools are needed to install a frameless shower door?
You’ll typically need a drill, level, measuring tape, silicone sealant, safety gear, and the included mounting hardware. Always check the manufacturer’s instructions for specific requirements.

4. How do I ensure my shower door won’t leak?
To prevent leaks, use high-quality clear silicone caulk along the edges and ensure your shower curb is properly sloped inward. Double-check door alignment and sweep seals during installation.

5. What’s the difference between framed and frameless door installation?
Framed shower doors are easier to install and more forgiving with wall irregularities. Frameless doors, like those from Bakiwhs, require precise measurements and level surfaces but offer a cleaner, modern look.