Installing a new shower door may seem like a professional-only job, but with the right tools and some guided instruction, you can do it yourself and achieve outstanding results. Whether you're installing a frameless sliding shower door, a swing glass door, or a bathtub door, the steps below will help simplify the process and get your bathroom looking sleek and modern.

Step 1: Measure Your Opening Accurately

Before anything else, take precise measurements of your shower opening — both width and height. Use a spirit level to ensure the walls are plumb and the base is level. Most issues with shower doors start with inaccurate measurements.

✅ Tip: Always measure at the top, middle, and bottom of the opening — walls aren’t always perfectly straight.

Step 2: Choose the Right Door

Select a shower door that matches your space:

• Sliding doors are perfect for tight spaces.

• Swing doors offer a luxurious look.

• Tub doors are ideal for combo bath/showers.

Look for features like 3/8” tempered safety glass, U-channel support, and durable hardware (Bakiwhs offers brass and stainless-steel options).

Step 3: Mark Drill Points

Hold the door frame or fixed panel against the wall and mark the holes where screws will go. Double-check your level to ensure everything is square.

⚠️ Reminder: Use masking tape over tile to avoid cracks when drilling.

Step 4: Drill and Mount

Using a diamond-tipped drill bit, carefully create holes in tile or stone surfaces. Secure the U-channel or wall jambs in place using the appropriate anchors and screws.

Step 5: Set the Glass Panels

Carefully lift the glass panels and insert them into the U-channel or brackets. Make sure the glass is aligned and plumb before tightening the brackets or clamps.

🚿 Pro tip: Use clear silicone at the base and joints to prevent leaks.

Step 6: Install the Handle and Hardware

Attach the door handle and towel bars, ensuring you do not overtighten the screws to avoid cracking the glass.

Bakiwhs kits usually include all hardware with instructions — including polished stainless steel or matte black finishes for a stylish upgrade.

Step 7: Final Adjustments

Make any necessary alignment adjustments to ensure smooth sliding or swinging. Check the door operation and test for leaks by running water along the frame.

Step 8: Let It Cure

After applying silicone, allow it to cure for at least 24 hours before using the shower.

🛠️ Professional Insight from Bakiwhs

Installing a shower door is more than a home improvement task — it’s an upgrade to your daily routine. At Bakiwhs, we engineer our shower doors with both the DIY homeowner and professional installer in mind. Our comprehensive guides, easy-to-follow video tutorials, and pre-packaged installation kits are crafted to make your experience stress-free.

Whether you're working with one of our frameless sliding models (like BS-05) or a single swing door with brass hardware (like BC-08), rest assured you’re getting durability, safety, and style in one package.

Need help with a custom size or unsure which model is right for your layout? Our expert support team is here to assist — before and after your purchase.